PHYSICAL MODELING OF ROLL PRESSING AT ASYMMETRIC EFFECT ON THE SEALING MATERIAL
https://doi.org/10.17073/0368-0797-2015-3-186-191
Abstract
The study relates to the preparation of metallic and non-metallic
components of blended materials and industrial wastes, for pyrometallurgical processes. The design improvement for roll briquetting press was proposed for compaction of granular materials used as raw materials for pyrometallurgical processes. One of the rolls was invited to perform with cells, and the second – with a smooth surface that can dramatically reduce the cost of manufacturing the tool. The authors have implemented physical modeling of the process using the installation of the original design when changing the confi guration of the cells in two versions: radial and triangular in shape. Physical modeling has shown that in the proposed scheme of the implementation process it is advisable to use cell of radial profi le, which leads to the achievement of large volumetric deformations of compressible material.
About the Authors
Yu. N. Loginov
Ural Federal University named after the fi rst President of Russia B. N. Yeltsin 19, Mira str., Ekaterinburg, 620002, Russia
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Metal Forming”
N. A. Babailov
Ural Federal University named after the fi rst President of Russia B. N. Yeltsin 19, Mira str., Ekaterinburg, 620002, Russia
Russian Federation
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Metal Forming”
D. N. Pervukhina
Ural Federal University named after the fi rst President of Russia B. N. Yeltsin 19, Mira str., Ekaterinburg, 620002, Russia
Russian Federation
Postgraduate of the Chair “Metal Forming”
Russian Federation
Postgraduate of the Chair “Metal Forming”
References
1. Ravich B.M. Briketirovanie v tsvetnoi i chernoi metallurgii [Briquetting in ferrous and nonferrous metallurgy]. Moscow: Metallurgiya. 1975. 232 p. (In Russ.).
2. El-Hussiny N.A., Shalabi M.E.H. A self-reduced intermediate product from iron and steel plants waste materials using a briquetting process. Powder Technology. 2011, vol. 205, pp. 217–223.
3. Loginov Y.N., Bourkine S.P., Babailov N.A. Cinematics and volume deformations during roll-press briquetting. Journal of Materials Processing Technology. 2001, vol. 118, no. 1–3, pp. 151–157.
4. Elishevich A.T. Briketirovanie poleznykh iskopaemykh [Briquetting of minerals]. Moscow: Nedra, 1989. 300 p. (In Russ.).
5. Pritykin D.P. Mekhanicheskoe oborudovanie dlya podgotovki shikhtovykh materialov [Mechanical equipment for the preparation of charge materials]. Part. 1. Mekhanicheskoe oborudovanie zavodov tsvetnoi metallurgii [Mechanical equipment for nonferrous metallurgical plants]. Moscow: Metallurgiya, 1988. 392 p. (In Russ.).
6. Loginov Yu.N., Burkin S.P., Babailov N.A., Polyanskii L.I. Mekhanika valkovogo briketirovaniya sypuchikh materialov [Mechanics of roll briquetting of loose materials]. Ekaterinburg: AMB. 2011. 304 p. (In Russ.).
7. Loginov Yu.N., Burkin S.P., Babailov N.A. Infl uence of the tool shape on the boundary conditions and seal at roller briquetting. Stal’. 2000, no. 9, pp. 87–91. (In Russ.).
8. Kim W.J., Lee K.E., Choi S.-H. Mechanical properties and microstructure of ultra fine-grained copper prepared by a high-speed-ratio differential speed rolling. Materials Science and Engineering A. 2009, vol. 506, pp. 71–79.
9. Krismanth Kenneth, Marsalka Joseph. Briquet forming machine and feeder system therefore. Patent no. US2001001670 SShA, MPK B30B11/16; B30B11/00. Publ. 05.24.2001.
10. Komarek Karl R. Briquetting press. Patent no. US4249878 SShA, MPK B30B11/16. Publ. 02.10.1981.
Review
For citations:
Loginov Yu.N., Babailov N.A., Pervukhina D.N. PHYSICAL MODELING OF ROLL PRESSING AT ASYMMETRIC EFFECT ON THE SEALING MATERIAL. Izvestiya. Ferrous Metallurgy. 2015;58(3):186-191. (In Russ.) https://doi.org/10.17073/0368-0797-2015-3-186-191
Views:
739
Email this article 