CREATING A DIFFUSION LAYER ON THE NARROW SIDES OF THE MOLD OF CONTINUOUS CASTING MACHINE USING ALUMINUM THERMAL SPRAY COATINGS | Gerasimova | Izvestiya. Ferrous Metallurgy

Izvestiya. Ferrous Metallurgy
Izvestiya vuzov. Chernaya metallurgiya

ISSN 0368-0797 (Print)
ISSN 2410-2091 (Online)

eng | рус

Preview

Izvestiya. Ferrous Metallurgy

Advanced search

Archives

Download this PDF file

For citations:

Gerasimova A.A., Radyuk A.G., Titlyanov A.E. CREATING A DIFFUSION LAYER ON THE NARROW SIDES OF THE MOLD OF CONTINUOUS CASTING MACHINE USING ALUMINUM THERMAL SPRAY COATINGS. Izvestiya. Ferrous Metallurgy. 2015;58(3):174-176. (In Russ.) https://doi.org/10.17073/0368-0797-2015-3-174-176

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 License.

ISSN 0368-0797 (Print)
ISSN 2410-2091 (Online)

* not an advertisement

Indexing Databases

* not an advertisement

Editor-in-Chief

Leont’ev L.I.

Article Tools

Finding References

Email this article (Login required)

Email the author (Login required)

About the Authors

A. A. Gerasimova
National University of Science and Technology “MISIS” (MISIS) 4, Leninskii pr., Moscow, 119049, Russia
Russian Federation

Cand. Sci. (Eng.), Assist. Professor, Academic Secretary of the Chair “ITO”

A. G. Radyuk
National University of Science and Technology “MISIS” (MISIS) 4, Leninskii pr., Moscow, 119049, Russia
Russian Federation

Sci. (Eng.), Professor of the Chair “Technology and Equipment for Pipe Production”

A. E. Titlyanov
National University of Science and Technology “MISIS” (MISIS) 4, Leninskii pr., Moscow, 119049, Russia
Russian Federation

Cand. Sci. (Eng.), Senior Researcher of the Chair “Technology and Equipment for Pipe Production”

Notifications