MECHANICAL AND PHYSICAL PROPERTIES OF CAST Fe – Mn – Al – C – N ALLOYS
https://doi.org/10.17073/0368-0797-2014-11-43-47
Abstract
Cast Fe + (12.7 – 25.6) % Mn + (0 – 14.4) % Al + (0.02 – 2.18) % C alloys including microalloyed by nitrogen (0,001 – 0,135) % N with high specifi c strength are experimentally investigated and studied. It is shown that cast high-carbon Fe – Mn – Al – С alloys, well give in to a hot deformation, up to 40 – 50 % of reduction without a fi recracking. At a warm strain in investigated alloys the high-tensile condition (σв to 1810 MPa) is realised at a toughness adequate supply (to 50 %). The Yield stress of high-carbon austenitic alloys (to 2.18 %) Fe – Mn – Al – С at room temperature attains 1200 MPa. Thermal capacity and thermal conduction decrease with increase at total alloying Al + C + N. Investigated alloys of iron with high contents of Mn and Al have high specific strength and can be used in cast and strain con-dition as high-strength with a toughness large supply, heatproof and wear-resistant.
About the Authors
A. V. Bronz
S.P. Korolev RSC «Energia» JSC (4A, Lenin Str., Korolev, Mos-cow Region, 141070, Russia)
Russian Federation
Cand. Sci. (Eng.), Senior Researcher
Russian Federation
Cand. Sci. (Eng.), Senior Researcher
D. Е. Kaputkin
National Research Technological University «MISiS» (4, Lenins-kypr., Moscow, 119049, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Assist. Professor, Director of the Institute of Undergraduate Studies
L. M. Kaputkina
National Research Technological University «MISiS» (4, Lenins-kypr., Moscow, 119049, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Phys.-Math.), Professor, Chief Researcher of the Chair of Plastic deformation of special alloys
V. E. Kindop
National Research Technological University «MISiS» (4, Lenins-kypr., Moscow, 119049, Russia)
Russian Federation
Cand. Sci. (Eng.), Senior Researcher, Deputy Head of Department of science
Russian Federation
Cand. Sci. (Eng.), Senior Researcher, Deputy Head of Department of science
A. G. Svyazhin
National Research Technological University «MISiS» (4, Lenins-kypr., Moscow, 119049, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor, Chief Researcher of the Chair “Metallurgy of steel and ferroalloys”
References
1. De Moor E., Gibbs P.J., Speer J.G. etc. Strategies for Third-Generation Advanced High-Strength Steel Development. AIST Transactions, Iron and Steel Technology. 2010. Vol. 7, no. 11, pp. 133–144.
2. Frommeyer G., Brux U. Microstructures and Mechanical Properties of High-Strength Fe – Mn – Al – C Light-Weight TRIPLEX Steels. Steel Research International. 2006. Vol. 77, no. 9–10, pp. 627–633.
3. Han K. H., Choo W. K. Phase Decomposition of Rapidly Solidifi ed Fe – Mn – Al – C Austenitic Alloy. Met. Trans. A. 1989. Vol. 20A, pp. 205–214.
4. Charles J., Berghezen A. Nickel-free austenitic steels for cryogenic applications: The Fe – 23 % Mn – 5 % Al – 0.2 % C alloys. Cryogenics. 1981. Vol. 21, no. 5, pp. 278–280.
5. Vysokoprochnye nemagnitnye stali. Sbornik statei [High-strength non-magnetic steel. Collection of articles]. Bannykh O.A. ed. Moscow: Nauka. 1978, pp. 49–56. (In Russ.).
6. Livshits B.G. Fizicheskie svoistva metallov i splavov [Physical properties of metals and alloys]. Moscow: Mashgiz, 1959. 368 p. (In Russ.).
7. Bronz A.V., Kaputkina L.M., Kindop V.E., Prokoshkina V.G., Svyazhin A.G. Experimental study of high-strength alloys Fe – Mn – Al – C – N. Problemy chernoi metallurgii i materialovedeniya. 2012, no. 3, pp. 57–62. (In Russ.).
8. Bronz A.V., Kaputkin D.E., Kaputkina L.M., Kindop V.E., Svyazhin A.G. Effect of chemical composition on the crystal lattice and physical properties of iron-manganese alloys with high content of aluminum. Metal Science and Heat Treatment. 2014, vol.55, no. 11–12, pp. 647–651.
9. Kaputkina L.M., Prokoshkina V.G., Svyazhin A.G. etc. Structure and properties of stainless steel alloyed with nitrogen and copper. Metal Science and Heat Treatment. 2009. Vol. 51, no. 5–6, pp. 286–291.
10. Svyazhin A.G., Kaputkina L.M. Dissolution and precipitation of excess phases in high-nitrogen steels. Materials Science Forum. 2010. Vol. 638–642, pp. 3026–3031.
11. Svyazhin A.G., Kaputkina L.M. High Nitrogen Steels: Today and Tomorrow. Proceed. 11th Int. Conf. on High Nitrogen Steels and Interstitial Alloys. Chennai. Printing House. 2013, pp. 12–22.
12. Kaputkina L.M., Prokoshkina V.G.. Khadeev G.E. etc. Diagrams of the Hot and Warm Deformation and Strain Aging of Nitrogen Bearing Austenitic Steels. Metal Science and Heat Treatment. 2013. Vol. 55, no. 5–6, pp. 322–327.
13.
Review
For citations:
Bronz A.V., Kaputkin D.Е., Kaputkina L.M., Kindop V.E., Svyazhin A.G. MECHANICAL AND PHYSICAL PROPERTIES OF CAST Fe – Mn – Al – C – N ALLOYS. Izvestiya. Ferrous Metallurgy. 2014;57(11):43-47. (In Russ.) https://doi.org/10.17073/0368-0797-2014-11-43-47
Views:
859
Email this article 