A NEW METHOD FOR CALCULATION OF EXCHANGE AREAS IN HIGH TEMPERATURE FURNACES, BASED ON DISCRET TRANSFER MODELLING
https://doi.org/10.17073/0368-0797-2014-10-47-50
Abstract
A new method based on discrete transfer modeling technique for calculating the direct exchange areas (DEA) in zonal method is presented. The key property of this method is fast DEA matrix evaluation. The computational time was found to be small in comparison to other methods for direct exchange areas evaluations based on numerical quadrature integration. The accuracy of the procedure is established by comparing the predictions with those based on the numerical integration on test case (IFRF furnace).
About the Authors
G. R. MalikovRussian Federation
Dr. Sci. (Eng.), Senior Researcher
V. G. Lisienko
Russian Federation
Dr. Sci. (Eng.), Professor
A. A. Titaev
Russian Federation
Senior Lecturer
References
1. Modest M.F. Radiative Heat Transfer, Second Edition. Academic Press. New York, 2003.
2. Lisienko V.G. Sovershenstvovanie i povyshenie effektivnosti energo-tekhnologii i proizvodstv (integrirovannyi energo-tehnologicheskii analiz: teoriya i praktika) [Improved and effective energy technologies and industries (integrated energy-technological analysis: theory and practice)]. Vol.1. Moscow: Teplotehnik, 2008. 608 p. (In Russ.).
3. Lockwood F.C., Shah N.G. A new radiation solution method for incorporation in general combustion prediction procedures. Eighteenth Symposium on Combustion. The Combustion Institute, 1981.
4. Lisienko V.G., Zhuravlev Yu.A., Kitaev B.I. Izvestiya VUZov. Chernaya metallurgiya = Izvestiya – Ferrous Metallurgy. 1973, no. 6, pp. 131–135. (In Russ.).
5. Hyde D.J., Truelove J.S. The Discrete Ordinates Approximation for Multidimensional Radiant Heat Transfer in Furnaces. AERE R-8502. AERE Harwell. UK, 1977.
6. Kim S.H., Huh K.Y. Assessment of the finite-volume method and the discrete ordinates method for radiative heat transfer in a three-dimensional rectangular enclosure. Numer. Heat Transfer. Part B 35 (1999), pр. 85–112.
7.
Review
For citations:
Malikov G.R., Lisienko V.G., Titaev A.A. A NEW METHOD FOR CALCULATION OF EXCHANGE AREAS IN HIGH TEMPERATURE FURNACES, BASED ON DISCRET TRANSFER MODELLING. Izvestiya. Ferrous Metallurgy. 2014;57(10):47-50. (In Russ.) https://doi.org/10.17073/0368-0797-2014-10-47-50