STRUCTURE AND TEXTURE FORMATIONS EDGEWISE OF FERRITIC STEEL BAND BY HOT ROLLING
https://doi.org/10.17073/0368-0797-2014-10-13
Abstract
The deformation structure (110)[001] is formed on the surface of a band bulk during the hot rolling of ferric steel. The deformation is spread at an equiaxed recrystalized grain structure. During implement-ing a cross-flow of the material (in an edge zone) in a hot rolling process a stable orientation {112}<110> is formed in surface layers. Cooling rate of the band edge differs considerably from the velocity in the middle of the band. That in turn excludes the recristallization process, and therefore keeps prolate deformed (polygonized) grain structure, which has the deformation texture in the pure state.
About the Authors
A. G. Uritskii
Institute of Engineering Sciences of Ural Branch of the Russian Academy of Science (34, Komsomolskaya str., Ekaterinburg, 620219, Russia)
Russian Federation
Russian Federation
Postgraduate
A. A. Redikul’tsev
Ural Federal University named after the First President of Russia B.N. Yel’tsin (19, Mira str., Ekaterinburg, 620002, Russia)
Russian Federation
Cand. Sci. (Eng.), Assist. Professor
Russian Federation
Cand. Sci. (Eng.), Assist. Professor
S. V. Smirnov
Institute of Engineering Sciences of Ural Branch of the Russian Academy of Science (34, Komsomolskaya str., Ekaterinburg, 620219, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Deputy Director, Senior research
M. L. Lobanov
Ural Federal University named after the First President of Russia B.N. Yel’tsin (19, Mira str., Ekaterinburg, 620002, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor
G. M. Rusakov
Ural Federal University named after the First President of Russia B.N. Yel’tsin (19, Mira str., Ekaterinburg, 620002, Russia)
Institute of Physics of Metals of Ural Branch of the Russian Academy of Science (18, S. Kovalevskaya str., Ekaterinburg, 620219, Russia)
Russian Federation
Russian Federation
Cand. Sci. (Phys.-math.), Senior research, Assist. Professor
References
1. Vishnyakov Ya.D., Babareko A.A. Teoriya obrazovaniya tekstur v metallakh i splavakh [Theory of texture formations in metals and alloys]. Moscow: Nauka, 1979. 343 p. (In Russ.).
2. Shtremel’ M.A. Prochnost’ splavov [Alloy strength]. Part 2. Moscow: izd. MISIS, 1997. 525 p. (In Russ.).
3. Rekristallizatsiya metallicheskikh materialov [Recrystallization of metallic materials]. Hessner F. ed. Moscow: Metallurgiya, 1982. 352 p. (In Russ.).
4. Honikomb R. Plasticheskaya deformatsiya metallov [Plastic deformation of metals]. Moscow: Mir, 1972. 408 p. (In Russ.).
5. Rusakov G.M., Lobanov M.L., Redikul’tsev A.A. and Kagan I.V. Reorientation of body-centered cubic single crystals in cold rolling. Steel in Translation. 2010. Vol. 40, no. 3, pp. 219–224.
6. Lifanov V.F. Prokatka transformatornoi stali [Rolling of transformer steel]. Moscow: Metallurgiya, 1975. 200 p. (In Russ.).
7. Gol’dshtein V.Ya., Pashchenko S.V., Grazhdankin S.N. Structure formation in hot rolling of Fe – 3 % Si alloy. Physics of Metals and Metallography. 1980. Vol. 50, no. 6, pp. 1213–1217. (In Russ.).
8. Shimizu Y., Ito Y., Iida Y. Formation of the Goss Orientation Near the Surface of 3 Pct Silicon Steel During Hot Rolling. Met. Trans. 1986. Vol. 17A, August, pp. 1323–1334.
9. Lobanov M.L., Rusakov G.M., Redikul’tsev A.A. Electrotechnical anisotropic steel. Part I. History of development. Metal Science and Heat Treatment. 2011. Vol. 53, no. 7–8, pp. 326–332.
10. Lobanov M.L., Rusakov G.M., Redikul’tsev A.A. Electrotechnical anisotropic steel. Part II. State-of-the-art. Metal Science and Heat Treatment. 2011. Vol. 53, no. 7-8, pp. 355–359.
11. Lobanov M.L., Rusakov G.M., Redikul’tsev A.A. and Kagan I.V. Deformation Twinning Related Features of Primary Recrystallization of (110)[001] Single Crystals of the Fe – 3 % Si – 0.5 % Cu Alloy. The Physics of Metals and Metallography. 2011. Vol. 111, no. 6, pp. 587–591.Acknowledgements. The work was carried out on laboratory equipment of “Structural analysis methods and properties of materials and nanomaterials” NBI UFU within the framework of the RAS contract (theme “Structure”).
12.
Review
For citations:
Uritskii A.G., Redikul’tsev A.A., Smirnov S.V., Lobanov M.L., Rusakov G.M. STRUCTURE AND TEXTURE FORMATIONS EDGEWISE OF FERRITIC STEEL BAND BY HOT ROLLING. Izvestiya. Ferrous Metallurgy. 2014;57(10):42-46. (In Russ.) https://doi.org/10.17073/0368-0797-2014-10-13
Views:
745
Email this article 