EFFECT OF TEMPERATURE MODE OF LIMESTONE CALCINATIONIN A ROTARY FURNACE ON LIME QUALITY
https://doi.org/10.17073/0368-0797-2014-9-66-68
Abstract
The influence of the temperature mode in the rotary furnace on lime quality is established experimentally in laboratory and industrial conditions with its impact on the slag mode during electric smelting of steel in electric arc furnaces.
About the Authors
A. A. Ansimov
Stary Oskol Technological Institute of National University of Science and Technology “MISiS” (42, Makarenko microdistrict, Staryi Oskol, Belgorod Region, 309516, Russia)
Russian Federation
Postgraduate of the Chair “Metallurgy and Metallography”
Russian Federation
Postgraduate of the Chair “Metallurgy and Metallography”
E. E. Merker
Stary Oskol Technological Institute of National University of Science and Technology “MISiS” (42, Makarenko microdistrict, Staryi Oskol, Belgorod Region, 309516, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair “Metallurgy and Metallography”
References
1. Nekhlebaev Yu.P. Ekonomiya topliva pri proizvodstve izvesti [Fuel savings in the production of lime]. Moscow: Metallurgiya, 1987. 136 p. (In Russ.).
2. Bergauz A.L, Rozenfel’d E.I. Povyshenie effektivnosti sgoraniya topliva v pechakh [Improving the effi ciency of fuel combustion in furnaces]. Leningrad: Nedra, 1984. 175p. (In Russ.).
3. Merker E.E, Agarkova T.V., Gubin V.V. Improving the efficiency of fuel combustion in rotary furnaces for lime roasting. Byulleten’ NTI “Chernaya metallurgiya”, no. 5, 1995, pp. 28–30. (In Russ.).
4.
Review
For citations:
Ansimov A.A., Merker E.E. EFFECT OF TEMPERATURE MODE OF LIMESTONE CALCINATIONIN A ROTARY FURNACE ON LIME QUALITY. Izvestiya. Ferrous Metallurgy. 2014;57(9):66-68. (In Russ.) https://doi.org/10.17073/0368-0797-2014-9-66-68
Views:
688
Email this article 