DENDRITIC LIQUATION IN IRON ALLOYS, DEPENDING ON THE MASS OF EXTENSION ELEMENTS AND THEIR PHYSICAL PROPERTIES
https://doi.org/10.17073/0368-0797-2014-9-52-55
Abstract
Dendritic liquation of admixtures of metal is heterogeneity of composition in the axes of dendrite and interdendritic area. Two tendencies of liquation of elements are found in the alloys of iron: in environments-him for all elements a liquation diminishes at the increase of concentration of addition; for a from-efficient element a liquation is increased with the concentration of element. The new order of location of elements is specified among superficial activity of metals in liquid iron. This order can be used for the choice of elements for the desorption of harmful admixtures from the surface of solidifi able crystals of metal.
Keywords
dendrite,
coefficient of liquation,
carbon,
sulphur,
phosphorus,
nickel,
superficial activity,
adsorption,
desorption
About the Authors
A. M. Skrebсov
Priazovsk State Technical University (7, Universitetskaya st., Mariupol, Donetsk region, Ukraine, 87500)
Ukraine
Ukraine
Dr. Sci. (Eng.), Professor
Ju. D. Kuz’min
Priazovsk State Technical University (7, Universitetskaya st., Mariupol, Donetsk region, Ukraine, 87500)
Ukraine
Ukraine
Senior Lecturer
A. O. Sekachjov
Priazovsk State Technical University (7, Universitetskaya st., Mariupol, Donetsk region, Ukraine, 87500)
Ukraine
Ukraine
Postgraduate
A. S. Kachikov
Priazovsk State Technical University (7, Universitetskaya st., Mariupol, Donetsk region, Ukraine, 87500)
Ukraine
Postgraduate
Ukraine
Postgraduate
V. V. Terzi
Priazovsk State Technical University (7, Universitetskaya st., Mariupol, Donetsk region, Ukraine, 87500)
Ukraine
Ukraine
Senior laboratory assistant
References
1. Golikov I.N., Maslenkov S.B. Dendritnaya likvatsiya v stalyakh i splavakh [Dendritic segregation in steels and alloys]. Moscow: Metallurgiya, 1977. 224 р. (In Russ.).
2. Elanskii G.N. Razlivka i kristallizatsiya stali [Steel casting and crystallization]. Moscow: MGVI, 2010. 192 p. (In Russ.).
3. Skoblo S.Ya., Kazachkov E.A. Slitki dlya krupnykh pokovok [Ingots for large forgings]. Moscow: Metallurgiya. 1973. 248 р. (In Russ.).
4. Zhurenkov P.M., Egorshin T.V., Golikov I.N. Metallovedenie i obrabotka metallov. 1964, no. 2, рр. 25–28. (In Russ.).
5. Regel’ A.R., Glazov V.M. Periodicheskii zakon i fi zicheskie svoistva elektronnykh rasplavov [Periodic law and physical properties of electronic melts]. Moscow: Nauka, 1978. 309 p. (In Russ.).
6. Dyudkin D.A., Kiselenko V.V. In: 50 let nepreryvnoi razlivki stali v Ukraine. Sb. nauch. tr. konf. 4–5 noyabrya 2010 g. (50 years of continuous casting of steel in Ukraine. Conference Proceedings Collection November, 4–5, 2010). Donetsk: ”Noulidzh ”, 2010, pp. 205–212. (In Russ.).
7. Braun M.P. Mikrolegirovanie stali [Microalloying of steel]. Kiev: Naukova dumka, 1982. 303 p. (In Russ.).
8. Elanskii G.N. Periodicheskaya sistema elementov D.I. Mendeleeva [Mendeleev Periodic system of elements]. Moscow. MGVMI, 2011. 196 p. (In Russ.).
9.
Review
For citations:
Skrebсov A.M., Kuz’min J.D., Sekachjov A.O., Kachikov A.S., Terzi V.V. DENDRITIC LIQUATION IN IRON ALLOYS, DEPENDING ON THE MASS OF EXTENSION ELEMENTS AND THEIR PHYSICAL PROPERTIES. Izvestiya. Ferrous Metallurgy. 2014;57(9):52-55. (In Russ.) https://doi.org/10.17073/0368-0797-2014-9-52-55
Views:
818
Email this article 