DIFUSION POWDER Ti – Al-SILICONIZING OF STEEL 12Cr18Ni10Ti UNDER REDUCED PRESSURE
https://doi.org/10.17073/0368-0797-2014-7-67-69
Abstract
The phase and chemical composition, structure and microhardness, diffusion of multilayer coatings containing titanium, aluminum and silicon were examined at samples of steel 12Cr18Ni10Ti. It was established that the coating was formed on the basis of intermetallic compounds, carbides and titanium nitrides, as well as a solid solutions of titanium, aluminum, silicon, nickel and chromium in the austenite substrate.
About the Authors
V. G. Khizhnyak
Kiev Polytechnic Institute, (Pobedy pr., 37, Kiev, 03056, Ukraine)
Ukraine
Dr. Sci. (Eng.), Professor of the Chair of Material Science and Heat treatment
Ukraine
Dr. Sci. (Eng.), Professor of the Chair of Material Science and Heat treatment
M. V. Arshuk
Kiev Polytechnic Institute, (Pobedy pr., 37, Kiev, 03056, Ukraine)
Ukraine
Postgraduate of the Chair of Material Science and Heat treatment
Ukraine
Postgraduate of the Chair of Material Science and Heat treatment
O. E. Datsyuk
Kiev Polytechnic Institute, (Pobedy pr., 37, Kiev, 03056, Ukraine)
Ukraine
Postgraduate
Ukraine
Postgraduate
References
1. Borisenok G.V., Vasil’ev L.A., Voroshnin L.G. etc. Khimiko-termicheskaya obrabotka metallov i splavov [Chemical heat treatment of metals and alloys]. Moscow: Metallurgiya. 1981, 424 p. (In Russ.).
2. Kolomytsev P.T. Zharostoikie diffuzionnye pokrytiya [Heat-resistant diffusion coatings ]. Moscow: Metallurgiya. 1979, 272 p. (In Russ.).
3.
Review
For citations:
Khizhnyak V.G., Arshuk M.V., Datsyuk O.E. DIFUSION POWDER Ti – Al-SILICONIZING OF STEEL 12Cr18Ni10Ti UNDER REDUCED PRESSURE. Izvestiya. Ferrous Metallurgy. 2014;57(7):67-69. (In Russ.) https://doi.org/10.17073/0368-0797-2014-7-67-69
Views:
570
Email this article 