PROACTIVE REPAIRS IN STEEL INDUSTRY
https://doi.org/10.17073/0368-0797-2014-8-18-24
Abstract
Proactive repairs suggest the measures to slow the formation of defects (cracks, wear), causing their conduct. In this case a post-repair operating time of mechanisms is increased. That reduces significantly repair costs and downtime. The results of the proactive repairs at some of the Ural enterprises are exemplifi ed.
About the Author
V. A. Korotkov
Nizhny Tagil Institute of Technology (Branch) of the Ural Federal University named after the fi rst President of Russia B.N. Yeltsin (59, Krasnogvardeiskaya str., Nizhny Tagil, Sverdlovsk Region, 622031, Russia)
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Professor (vk@udgz.ru)
References
1. Orlov P.I. Osnovy konstruirovaniya. Vols. 1–2. Vol. 1. Uchaev P.N. ed. Moscow: Mashinostroenie, 1988. 560 p. (In Russ.).
2. Goncharov K.A., Chechulin Yu.B. Simulation of the stress-strain state of the die for forming of large-diameter pipes. Remont, vosstanovlenie, modernizatsiya. 2011, no. 7, pp. 33–38. (In Russ.).
3. Korotkov V.A., Zotov A.S. Repair welding of press’ cross-piece. Svarka i diagnostika. 2008, no. 5, pp. 26–27. (In Russ.).
4. Korotkov V.A., Chubelov V.A. Design solutions as a means of increasing the effectiveness of the protective surfacing. Tyazheloe mashinostroenie. 2000, no. 7, pp. 35–36. (In Russ.).
5. Korotkov V.A., Mikhailov I.D., Babailov D.S. The study of welding of CCM rollers. Svarochnoe proizvodstvo. 2007, no. 1, pp. 30–31. (In Russ.).
6. Shekurov A.V., Vinogradov S.V. Improving of repairs of degassers. Remont, vosstanovlenie, modernizatsiya. 2005, no. 10, pp.14–17. (In Russ.).
7. Korotkov V.A., Mikhailov I.D., Agafonov E.Zh. Provoloka dlya naplavki [Wire for facing]. Patent RF no. 2293640. Otkrytiya. Izobreteniya. 2007, no. 5. (In Russ.).
8. Korotkov V.A., Agafonov E.Zh., Mikhailov I.D. Uzel krepleniya plunzhera v nasose vysokogo davleniya [Attachment of fi tting plunger in high-pressure pump]. Patent RF no. 78272. Poleznye modeli. 2008, no. 32. (In Russ.).
9. Korotkov V.A., Mikhailov I.D., Vesnin A.M., Zotov A.S. In: Tekhnologii remonta, vosstanovleniya i uprochneniya detalei mashin, mekhanizmov, oborudovaniya, instrumenta i tekhnologicheskoi osnastki: materialy 10-i Mezhdunarodnoi nauch.-prakt. konf. [Technology of repairs, restoration and strengthening of machine parts, machinery, equipment, tools and tooling: Proceedings of the 10th International scientifi c-practical conf.]. Part.1. St. Petersburg: Izdvo politekhn. un-ta, 2008, pp. 184–192. (In Russ.).
10. Agafonov E.Zh., Korotkov V.A., Shekurov A.V., Yachmenev E.V. Recovery of heavy rolls by electrospark alloying. Gornyi zhurnal. 2006, no. 2, p. 59–61. (In Russ.).
11. Korotkov V.A., Shekurov A.V. Investigations into plasma quenching. Welding International. 2008. Vol. 22, no. 7, pp. 475–479.
12. Anan’ev S.P., Korotkov V.A. Study of wear resistance of materials of crane rails and wheels. Vestnik mashinostroeniya. 2011, no. 8, pp. 35–37. (In Russ.).
13. Korotkov V.A., Mikhailov I.D., Agafonov E.Zh. Increasing resistance of stamps by plasma quenching. Kuznechno-shtampovoe proizvodstvo. Obrabotka metallov davleniem. 2009, no. 1, pp. 40–45. (In Russ.).
14. Korotkov V.A. Plasma quenching of gear and slotted couplings. Russian Engineering Research. 2009. Vol. 29, no. 8, pp. 813–816.
15. Korotkov V.A. 10-year anniversary of the use of manual plasma quenching. Tyazheloe mashinostroenie. 2012, no. 1, pp. 2–5. (In Russ.).
16. Korotkov V.A. Experience of the semiautomatic welding machines in Ural’s enterprises. Svarochnoe proizvodstvo. 2004, no. 3, pp. 32–36. (In Russ.)
17. Korotkov V.A., Mikhailov I.D. Experience with repair welding of mining and metallurgical equipment. Welding International. 2012. Vol. 26, no. 11, pp. 895-900.
18.
Review
For citations:
Korotkov V.A. PROACTIVE REPAIRS IN STEEL INDUSTRY. Izvestiya. Ferrous Metallurgy. 2014;57(8):18-24. (In Russ.) https://doi.org/10.17073/0368-0797-2014-8-18-24
Views:
592
Email this article 