THE INFLUENCE OF GEOMETRICAL PARAMETERS ON INCREMENT OF H-BEAM FLANGES IN UNIVERSAL BEAM GROOVE
https://doi.org/10.17073/0368-0797-2013-9-67-68
Abstract
The mathematical model of metal forming under rolling of H-beam in universal beam groove was developed that enables to assess effect of the geometrical parameters on increment or pulling-down of a rolling section flange. The influence of draft ratio of web and flange on increment or pulling-down of flange and relative height of flange was determined.
About the Authors
S. O. Nepryakhin
Уральский федеральный университет
Russian Federation
Russian Federation
V. A. Shilov
Уральский федеральный университет
Russian Federation
Russian Federation
D. L. Schwartz
Уральский федеральный университет
Russian Federation
Russian Federation
References
1. Матвеев Б.Н. // Черная металлургия: Бюл. ин-та «Черметинформация». 2006. № 2. С. 40 – 43.
2. Свейковски У., Нерзак Т. // Металлургическое производство и технология (МРТ). 2006. № 2. С. 50 – 56.
3. Takashima Y., Yanagimoto J. // Steel Research int. 2011. Vol. 82. No. 10. P. 1240 – 1247.
Review
For citations:
Nepryakhin S.O., Shilov V.A., Schwartz D.L. THE INFLUENCE OF GEOMETRICAL PARAMETERS ON INCREMENT OF H-BEAM FLANGES IN UNIVERSAL BEAM GROOVE. Izvestiya. Ferrous Metallurgy. 2013;56(9):67-68. (In Russ.) https://doi.org/10.17073/0368-0797-2013-9-67-68
Views:
540
Email this article 