FORMATION OF STRUCTURE, PHASE COMPOSITION AND DEFECT SUBSTRUCTURE IN BULK QUENCHED RAILS OF SPECIAL CATEGORIES
https://doi.org/10.17073/0368-0797-2014-6-54-61
Abstract
Using transmission electron microscopy methods the layer by layer analysis of low temperature reliability and increased wear resistance and contact durability rails head is carried out and quantitative creation regularities of structure phase states and defect substructure formed according to diffusion and shear of γ → α-transformation on rail cross section are established.
About the Authors
V. E. Gromov
Siberian State Industrial University (Novokuznetsk, Kemerovo Region, Russia)
Russian Federation
Russian Federation
Dr. Phys.-math., Professor
K. V. Volkov
ОАО «Evraz – West Siberian Metallurgical Plant» (Novokuznetsk, Kemerovo Region, Russia)
Russian Federation
Russian Federation
Cand. Eng., Technical Directore
Yu. F. Ivanov
National Research Tosmky Polytechnic University (Tomsk, Tomsk Region, Russia)
Institute of High Current Electronics SB RAS (Tomsk, Tomsk Region, Russia)
Russian Federation
Russian Federation
Dr. Phys.-math., Professor
K. V. Morozov
Siberian State Industrial University (Novokuznetsk, Kemerovo Region, Russia)
Russian Federation
Russian Federation
Engineer
K. V. Alsaraeva
Siberian State Industrial University (Novokuznetsk, Kemerovo Region, Russia)
Russian Federation
Russian Federation
Postgraduate
References
1. Gromov V.E., Berdyshev V.A., Kozlov Ye.V. etc. Gradientnye strukturno-fazovye sostojanija v rel’sovoj stali (Gradient structural-phase state in the rail steel). Moscow: Nedra kommjunikejshins LTD, 2000. 176 p.
2. Aktual’nye problemy proizvodstva rel’sov (Actual problems of rail production). Gromov V.E. etc. ed. Novokuzneck: izd. SibGIU, 2001. 260 p.
3. Kozyrev N.A., Pavlov V.V., Godik L.A., Dement’-ev V.P. Zheleznodorozhnye rel’sy iz jelektrostali (Railway rails of electric steel). Novokuzneck: izd. SibGIU, 2006. 388 р.
4. Vorozhishhev V.I. Sostav i tehnologija proizvodstva rel’sov povyshennoj rabotosposobnosti (Composition and technology of rail production increased effi ciency). Novokuzneck: Novokuzneckij poligrafi cheskij kombinat, 2008. 351 p.
5. Olivares R.O., Garsia C.I., D e Ardo A. et al. Wear. 2011. Vol. 271. Pp. 364 – 373.
6. Kang Hao, W u Di, Zhao Xiam-ming. Journal of iron and steel, research, international. 2013. Vol. 20(2). Pp. 33 – 37.
7. Gromov V.E., Volkov K.V., Ivanov Yu.F. etc. Problemy chernoj metallurgii i materialovedenija. 2013. № 4. Pp. 61 – 68.
8. Volkov K.V., Gromov V.E., Ivanov Yu.F., Grishu-nin V.A. Povyshenie ustalostnogo resursa rel’sovoj stali jelektronno-puchkovoj obrabotkoj (Increased fatigue life of the rail steel electron beam processing). Novokuzneck: InterKuzbass, 2013. 215 p.
9. Gromov V.E., Ivanov Yu.F., Grishunin V.A. etc. Uspehi fi ziki metallov. 2013. № 1. Pp. 67 – 83.
10. Panin V.E., Lihachev V.A., Grinyaev Yu.V. Strukturnye urovni deformacii tverdyh tel (Structural levels of deformation of solids). Novosibirsk: Nauka, 1985. 229 p.
11. Shur E.A. Povrezhdenija rel’sov (Damage to the rails). Moscow: Intekst, 2012. 225 p.
12. Utevskiy L.M. Difraktsionnaya elektronnaya mikrosko piya v metallovedenii (Diffraction electron microscopy in metal lur gy). Moscow: Metallurgiya, 1973. 584 p.
13. Andrews K., Dayson D., Kioun S. Elektronogrammy i ih interpretatsiya (Electron diffraction and their interpretation). Mos-cow: Mir, 1971. 256 p.
14. Hirsh P., Hovi A., Nikolson R. etc. Elektronnaya mikroskopiya tonkih kristallov (Electron microscopy of thin crystals). Moscow: Mir, 1968. 574 p.
15. Kurdyumov V.G., Utevskiy L.M., Entin R.I. Prevraschheniya v zheleze i stali (Transformation in iron and steel). Mos-cow: Nauka, 1977. 236 p.
16. Tushinskiy L.I., Bataev A.A., T ihomirova L.B. Struktura perlita i konstruktivnaja prochnost’ stali (Pearlite structure and structural strength of steel). Novosibirsk: VO Nauka, 1993. 280 p.
17. Ivanov Yu.F., Kornet E.V., Kozlov Ye.V., Gromov V.E. Zakalennaja konstrukcionnaja stal’: struktura i mehanizmy uproch
18. nenija (Physics and mechanics of drawing and forging). Novokuzneck: izd. SibGIU, 2010. 174 p.
19. Gromov V.E., Kozlov Ye.V., Bazaykin V.I. etc. Fizika i mehanika volochenija i obyemnoj shtampovki (Physics and mechanics of drawing and forging). Moscow: Nedra, 1997. 293 p.
20.
Review
For citations:
Gromov V.E., Volkov K.V., Ivanov Yu.F., Morozov K.V., Alsaraeva K.V. FORMATION OF STRUCTURE, PHASE COMPOSITION AND DEFECT SUBSTRUCTURE IN BULK QUENCHED RAILS OF SPECIAL CATEGORIES. Izvestiya. Ferrous Metallurgy. 2014;57(6):54-61. (In Russ.) https://doi.org/10.17073/0368-0797-2014-6-54-61
Views:
670
Email this article 