THE POWER ANALYSIS OF THE PROCESS OF CRUSHING MACHINE WITH TRANSLATIONAL MOTION OF THE JAW
https://doi.org/10.17073/0368-0797-2014-6-41-44
Abstract
The article considers the claw conditions of a piece of crushable material in a crushing machine with a translational motion of the jaw and outer power factors having an effect on it when crushing. It has been determined that on the assumption of different focuses of a part of a relatively moveable jaw both plane stress and linear stress conditions can occur in a crushed piece.
About the Authors
A. G. Nikitin
Siberian State Industrial University (Novokuznetsk, Kemerovo region, Russia)
Russian Federation
Dr. Eng., Assist. Professsor
Russian Federation
Dr. Eng., Assist. Professsor
S. A. Laktionov
Siberian State Industrial University (Novokuznetsk, Kemerovo region, Russia)
Russian Federation
Russian Federation
Сand. Phys.-math. Sci., Assist. Professsor
A. V. Vitushkin
Siberian State Industrial University (Novokuznetsk, Kemerovo region, Russia)
Russian Federation
Russian Federation
Senior Lecturer
References
1. Nikitin A.G., L yulenkov V.I., Saharov D.F., Vi-tushkin A.V. Sсhekovaya drobilka (Jaw crusher). Patent RF № 2453370. Byul. Izobreteniya, № 17. 2012.
2. Nikitin E.M. Teoreticheskaya mehanika (Theoretical Mechanics). Moscow: Nauka, 1977. 416 p.
3. Nikitin A.G., Saharov D.F. Izv. vuz. Chernaya metallurgiya. 2010. № 10. Pp. 41, 42.
4.
Review
For citations:
Nikitin A.G., Laktionov S.A., Vitushkin A.V. THE POWER ANALYSIS OF THE PROCESS OF CRUSHING MACHINE WITH TRANSLATIONAL MOTION OF THE JAW. Izvestiya. Ferrous Metallurgy. 2014;57(6):41-44. (In Russ.) https://doi.org/10.17073/0368-0797-2014-6-41-44
Views:
540
Email this article 