The possibility of using jet metal heating
https://doi.org/10.17073/0368-0797-2022-9-615-618
Abstract
The international metallurgical World Steel Association has published new data that reviewing the situation in the global steel market. According to the published data for 2021 the production of steel on the world market decreased by 1 % (to 1.83 billion tons). The reduction in steel production on the world stage is the result of sharp fluctuations in market conditions associated with the pandemic. If it is necessary to urgently increase the volume of rolled metal production, the issues of uniformity of metal heating before rolling, stamping and forging, as well as improving the thermal operation of devices for heating the surface of slabs (which will simplify the design of heating devices, reduce the cost of heating and construction), are still relevant. One way to improve the heating process and increase the production of rolled metal is to use jet heating. This paper shows the results of modeling metal heating with nitrogen jets.
About the Authors
E. V. Laletina
National University of Science and Technology “MISIS”
Russian Federation
Russian Federation
Ekaterina V. Laletina, Postgraduate of the Chair “Energy-Efficient and Resource-Saving Industrial Technologies
4 Leninskii Ave., Moscow 119049, Russian Federation
K. S. Shatokhin
National University of Science and Technology “MISIS”
Russian Federation
Russian Federation
Konstantin S. Shatokhin, Cand. Sci. (Eng.), Assist. Prof. of the Chair “Energy-Efficient and Resource-Saving Industrial Technologies”
4 Leninskii Ave., Moscow 119049, Russian Federation
References
1. Kondrashenko S.I. Research and development of a method for heating a steel strip with jets of high-temperature nitrogen: Cand. Tech. Sci. Diss. Moscow: 2020, 157 p. (In Russ.).
2. GOST 9293-74. Gaseous and liquid nitrogen. Technical conditions. Introduced 1976-01-01. Moscow: Standartinform, 2007, 15 p. (In Russ.).
3. Korkodinov Ya.A. Review of a family of k-ɛ models for turbulence modeling. Vestnik PNI-PU. 2013, no. 2, pp. 5–16. (In Russ.).
4. Orszag S.A., Yakhot V., Flannery W.S., Boysan F., Choudhury D., Maruzewski J., Patel B. Renormalization group modeling and turbulence simulation. Proceedings of the Int. Conf. on Near-Wall Turbulent Flows, 15–17 March, 1993, Tempe, Arizona, USA, 1993, pp. 1031–1046.
5. Sakornsin R., Popov S.A. Improving the aerodynamic characteristics of a combined wing with addition of triangular protrusion. Electronic Journal “Trudy MAI”. 2013, no. 65. Available at URL: https://mai.ru/upload/iblock/f69/f69f3f7434eaccf0cec7745356983f9c.pdf (In Russ.).
Review
For citations:
Laletina E.V., Shatokhin K.S. The possibility of using jet metal heating. Izvestiya. Ferrous Metallurgy. 2022;65(9):615-618. (In Russ.) https://doi.org/10.17073/0368-0797-2022-9-615-618
Views:
273
Email this article 