MICROHARDNESS MEASUREMENT OF TiN – TiNi COMPOSITE OBTAINED BY ION-PLASMA DEPOSITION
https://doi.org/10.17073/0368-0797-2014-4-55-59
Abstract
The paper deals with the microhardness of TiN – TiNi composite obtained by iron-plasma deposition of titanium nitride on the TiNi alloy surface. The possibility to determine analytically the microhardness of thin surface layers according to the method of a restored print has been shown. The microhardness of the protective layer obtained by the proposed deposition regime is close to the base microhardness that meets the requirements for the TiNi-based items for medical applications.
About the Authors
V. V. Rubanic
State scientifi c institution Institute of acoustic engineering of Belarus National Academy of Sciences (Vitebsk, Belarus)
Vitebsk State Technological University (Vitebsk, Belarus)
Belarus
Belarus
Dr. Eng., Director, Professor
V. V. Rubanic
State scientifi c institution Institute of acoustic engineering of Belarus National Academy of Sciences (Vitebsk, Belarus)
Vitebsk State Technological University (Vitebsk, Belarus)
Belarus
Belarus
Cand. Eng., Senior Recearcher, Head of the Chair
D. A. Bagrets
State scientifi c institution Institute of acoustic engineering of Belarus National Academy of Sciences (Vitebsk, Belarus)
Belarus
Belarus
Junior Researcher
V. P. Bobrov
State scientifi c institution Institute of acoustic engineering of Belarus National Academy of Sciences (Vitebsk, Belarus)
Belarus
Belarus
Researcher assosiate
References
1. Lotkov A.I., Meysner L.L., Grishkov V.N. Fizika metallov i metallovedenie. 2005. T. 99. № 5. Pp. 66 – 78.
2. Ryhanen J. Biocompatibility of Nitinol. Minimally Invasive Therapy & Allied Technologies. 2000. Vol. 9. Pp. 99 – 107.
3. Yongqing Fu, Hejun Du, Sam Zhang. Deposition of TiN layer on TiNi thin fi lms to improve surface properties. Surface and Coatings Technology. 2003. Vol. 167. Pp. 129 – 136.
4. Gjunter V.Ye., Mirgazizov M.Z. Rossiyskiy vestnik dental’noy implantologii. 2004. № 1. Pp. 52 – 56.
5. Starosvetsky D. and Gotman I. Corrosion behavior of titanium nitride coated Ni – Ti shape memory surgical alloy. Biomaterials. 2001. Vol. 22. Pp. 1853 – 1859.
6. Beliy A.V., Karpenko G.D., Mishkin N.K. Struktura i metody formirovaniya iznosostoykih poverkhnostnykh sloev (Structure and methods of forming wear-resistant layers poverhnostnyih). Moscow: Mashinostroenie, 1991. 320 p.
7. Andreev A.A., Kostyuk G.I., Minaev N.A. – V kn.: sb. nauch. tr. Vestnik Nacional’nogo tehnicheskogo universiteta «HPI». Har’kov: 2011. 340 p.
8. Tabakov V.P., Chihranov A.V. Izvestiнa Samarskogo nauchnogo centra Rossijskoj akademii nauk. 2010. Vol. 12. № 4. Pp. 292 – 297.
9. Andreev A.A., Grigor’ev S.N., Gorban’ V.F. etc. Vestnik MGTU «Stankin». 2010. № 3 (11). Pp. 14 – 17.
10. Sanders J.O., Sanders E.A., More R., Ashman R.B. A preliminary investigation of shape memory alloy in the surgical correction of scoliosis. Spine. 1993. Vol. 18. Pp. 1640 – 1646.
11. Nash R., Iaganth C.S. The Ni – Zr System. Bull. Of Alloy Phase Diagrams. 1984. Vol. 5. № 2. Pp. 144 – 148.
12. Dixon T. K. Kwok, Martin Schulz, Ta o Hu, Chenglin Chu and Paul Chu. Surface Treatments of Nearly Equiatomic NiTi Alloy (Nitinol) for Surgical Implants. Biomedical Engineering. Trends in Materials Science. Mr Anthony Laskovski (Ed.) – 2011. ISBN: 978-953-307-513-6. InTech.
13. Bull S.J. Nanoindentation of coatings. J. Phys. D: Appl. Phys. 2005. Vol. 38. Pp. 393 – 413.
14. Bykov Yu.A., Karpuhin S.D. Spravochnik. Inzhenernyj zhurnal. 2003. № 10. Pp. 26 – 28.
15. Kolmakov A.G., Golovin Yu.I., Terent’ev V.F., Ba-kirov M.B. Metody opredelenija tverdosti metallicheskih mate-ria lov (Methods for determination of hardness of metallic materials). Voronezh: izd. Voronezhskogo gos. un-ta, 2000. 80 p.
16. Trahtenberg I.Sh., Vladimirov A.B., Yugov V.A. etc. Fizika metallov i metallovedenie. 2005. Vol. 99. № 6. Pp. 103 – 107.
17. Tuck J.R., Korsunsky A.M., Bhat D.G., Bull S.J. Indentation hardness evaluation of cathodic arc deposited thin hard coatings. Surface and Coatings Technology. 2001. Vol. 139. Pp. 63 – 74.
18. Korsunsky A.M., McGurk M.R., Bull S.J., Page T.F. The effect of creep on the residual stress in vapour deposited thin fi lms. Surface and Coatings Technology. 1998. Vol. 99. Pp. 171.
19. Tarasenko Yu.P., Careva I.N., Romanov I.G. Izv. Aka-demii nauk. Ser. fi zicheskaja. 2002. Vol. 66. № 8. Pp. 1223 – 1225.
20. Bykov Yu.A., Karpukhin S.D., Boychenko M.K., Chep tsov V.O. Sposob opredeleniya tverdosti pokrytiya (Method of determining the hardness of the coating). Patent RF № 2222801. 2004.
21.
Review
For citations:
Rubanic V.V., Rubanic V.V., Bagrets D.A., Bobrov V.P. MICROHARDNESS MEASUREMENT OF TiN – TiNi COMPOSITE OBTAINED BY ION-PLASMA DEPOSITION. Izvestiya. Ferrous Metallurgy. 2014;57(4):55-59. (In Russ.) https://doi.org/10.17073/0368-0797-2014-4-55-59
Views:
685
Email this article 