THE STRUCTURE OF LOW CARBON STEEL ROLLED SHEETS AFTER MILL SCALE REMOVING
https://doi.org/10.17073/0368-0797-2014-4-51-55
Abstract
The analysis of structure-phase state changes in the low carbon steel during mill scale removing is carried out by methods of optical and transmission electron microscopy. The bands formation with the increased perlite content caused by carbon liquation is noted.
About the Authors
Yu. F. Ivanov
National Research Tomsk Polytechnic University (Tomsk, Russia)
Institute of High Current Electronics Siberian Branch Russian Academy of Sciences (Tomsk, Russia)
Russian Federation
Russian Federation
Dr. Eng., Professor
V. E. Gromov
Siberian State Industrial University (Novokuznetsk, Kemerovo Region, Russia)
Russian Federation
Dr. Eng., Professor
Russian Federation
Dr. Eng., Professor
D. A. Kosinov
Siberian State Industrial University (Novokuznetsk, Kemerovo Region, Russia)
Russian Federation
student
Russian Federation
student
S. V. Konovalov
Siberian State Industrial University (Novokuznetsk, Kemerovo Region, Russia)
Russian Federation
Russian Federation
Cand. Eng., Assist. Professor
S. A. Barаnnikova
Institute of Strength Physics and Materials Science Siberian Branch Russian Academy of Sciences (Tomsk, Russia)
Russian Federation
Russian Federation
Dr. Eng., Heading Researcher
References
1. Braunshteyn O.E., Bazaykin V.I., Gromov V.E., Dorofeev V.V. Proizvodstvo listovogo prokata v valkah peremennogo sechenija (Production of fl at rolled steel in beams of variable section). Novo kuzneck: izd. SibGIU, 2008. 116 p.
2. Efimov O.Yu., Gromov V.E., Ivanov Yu.F. Formirovanie struktury, fazovogo sostava staley i splavov v uprochnyayushchikh tehnologiyah obrabotki davleniem (Formation of the structure, phase composition of steels and alloys in hardening technologies forming). Novokuznetsk: InterKuzbass, 2012. 345 p.
3. Matyuk V.F. Nerazrushajushhij kontrol’ i diagnostika. 2011. № 1. Pp. 3 – 31.
4. Sorokin V.G. Marochnik staley i splavov (Grade list steels and alloys). Moscow: Mashinostroenie, 1989. 640 p.
5. Utevskiy L.M. Difraktsionnaya elektronnaya mikroskopiya v metallovedenii (Diffractive electron microscopy in physical metallurgy). Moscow: Metallurgiya, 1973. 584 p.
6. Hirsh P., Hovi A., Nikolson R. etc. Elektronnaya mikroskopiya tonkih kristallov (Electron microscopy of thin crystals). Moscow: Mir, 1968. 574 p.
7. Gromov V.E., Kozlov Ye.V., Bazaykin V.I. etc. Fizika i mehanika volocheniya i ob’emnoy shtampovki (Physics and mechanics of drawing and volume punching). Moscow: Nedra, 1997. 293 p.
8. Ivanov Yu.F., Kornet E.V., Kozlov Ye.V., Gromov V.E. Zakalennaya konstruktsionnaya stal’: struktura i mekhanizmy uprochneniya (Hardened steel for construction: the structure and mechanisms of hardening). Novokuzneck: izd. SibGIU, 2010. 174 p.
9. Tsepkin A.S., Rumyantsev M.I., Shubin I.G., Pitrinina M.A. Byulleten’ «Chernaya metallurgiya». 2008. № 5. Pp. 37 – 40.
10. Pikering F.B. Fizicheskoe metallovedenie i razrabotka staley (Physical metallurgy of steels and development). Moscow: Metal-lurgiya, 1982. 184 p.
11. Gorelik S.S. Rekristallizatsiya metallov i splavov (Recrystallization of metals and alloys). Moscow: Metallurgija, 1978. 568 p.
12. Frantsenyuk I.V., Zaharov A.E. Uskorennoe ohlazhdenie lista (Accelerated cooling the sheet). Moscow: Metallurgiya, 1992. 186 p.
13.
Review
For citations:
Ivanov Yu.F., Gromov V.E., Kosinov D.A., Konovalov S.V., Barаnnikova S.A. THE STRUCTURE OF LOW CARBON STEEL ROLLED SHEETS AFTER MILL SCALE REMOVING. Izvestiya. Ferrous Metallurgy. 2014;57(4):51-55. (In Russ.) https://doi.org/10.17073/0368-0797-2014-4-51-55
Views:
668
Email this article 