In memory of Professor Tsolo Rashev (1933 – 2019)
https://doi.org/10.17073/0368-0797-2021-1-78-83
Abstract
The article contains biography of Tsolо Rashev – an outstanding metallurgical scientist of the 20th century. His life was devoted to the development of metallurgy in Bulgaria, to the research of metallurgical processes related to the production of nitrogen-containing and high-nitrogen steels and their various structural classes. Since his life was inseparable from this work, the article focuses on the main directions of his scientific activity. In particular, Professor Rashev has carried out the work on thermodynamics and kinetics of interaction of unconventional alloying elements with metals and slags in liquid and solid states, including studies on the solubility of nitrogen in melts of various iron-based alloying systems; on mathematical modeling of metallurgical processes; on technology and properties of high-quality, special and high-nitrogen steels and alloys. He has developed and implemented in practice methods and devices for processing and production of steels and alloys, paying particular attention to introduction and retention of nitrogen in steels and iron-based alloys. With his works Tsolo Rashev made an invaluable contribution to the world fund of scientific knowledge.
Keywords
steel,
melting,
alloying,
nitrogen,
pressure,
installation,
method,
smelting,
strength,
metallurgist,
Tsolo Rashev,
biography
About the Authors
M. V. Kostina
Baikov Institute of Metallurgy and Materials Science, RAS
Russian Federation
Russian Federation
Mariya V. Kostina, Dr. Sci. (Eng.), Assist. Prof., Senior Researcher, Head of the Laboratory "Physicochemistry and Mechanics of Metallic Materials"
49, Leninskii ave., Moscow 119991
L. Ts. Zhekova
Institute of Metal Science, Equipment and Technologies, Bulgarian Academy of Science
Bulgaria
Bulgaria
Lyubov Ts. Zhekova, Cand. Sci. (Eng.), Assist. Prof.
67, Shipchenski prohod str.., Sofia 1574
References
1. Pehlke R.D., Elliott J.F. Solubility of nitrogen in liquid iron alloys. Trans. AIME. 1960, vol. 218, pp. 1088–1101.
2. Okamto M., Tanaka R., Naito T., Fujimoto R. The phase diagram of the Fe–Cr–N System. Tetsu-to-Hagané. 1963, vol. 49, no. 13, pp. 1915–1921.
3. Pridantsev M.V., Talov N.P., Levin F.L. High-Strength Austenitic Steels. Moscow: Metallurgiya, 1969, 248 p. (In Russ.).
4. Rashev Ts.V., Eliseev A.V., Zhekova L.Ts., Bogev P.V. High nitrogen steels. Izvestiya. Ferrous Metallurgy. 2019, vol. 62, no. 7, pp. 503–510. (In Russ.). https://doi.org/10.17073/0368-0797-2019-7-503-510
5. Rashev Ts. Production of Alloyed Steel: Monograph. Sofiya: Izd-vo BAN, 1978, 246 p. (In Bulgar.).
6. Rashev Ts.V. Production of Alloyed Steel. Moscow: Metallurgiya, 1981, 246 p. (In Russ.).
7. Rashev Ts.V., Rasheva I.A, Kovachev E.I. etc. Tool Steels (Bulgarian Production). Rashev Ts. ed. Sofiya: Tekhnika, 1990, 224 p. (In Bulgar.).
8. Rashev Ts. High Nitrogen Steels. Metallurgy under Pressure: Monograph. Sofia: Bulg. Acad. Sci., 1995. (In Russ.).
9. Rashev Ts. High Nitrogen Austenitic Steels and Stainless Steels (manufacturing, properties and application): Int. monograph. Raj B., Mudali K. eds. Woodhead Publishing, 2004, 224 p.
10. Rashev Ts., Zhekova L. Feasibility study on developing high-nitrogen steels by refining in suspended state under high pressure. Metallurgist. 2007, vol. 51, no. 1-2, pp. 90–96. https://doi.org/10.1007/s11015-007-0018-0
11. Kostina M.V., Bannykh O.A., Blinov V.M. New non-magnetic Fe–Cr–N high-strength corrosion- and wear-resistant alloy. Part I. Influence of chromium and nitrogen on the structure and phase composition of Fe–Cr–N alloys. Elektrometallurgiya. 2005, no. 12, pp. 26–32. (In Russ.).
12. Kostina M.V., Bannykh O.A., Blinov V.M. New nonmagnetic chromium-nitrogen iron-based steel. Proceedings of 7 th Int. Conference “High Nitrogen Steels”, Belgium, Ostende, 19-22 September, 2004, pp. 395–403.
13. Bannykh O.A., Blinov V.M., Rashev Ts.V., Ustinovshchikov Yu.I., Kostina M.V., Andreev Ch.A. etc. High strength, corrosion resistant austenitic steel. Patent RF no. 98121664, publ. 07.12.98. (In Russ.).
14. Bannykh O.A., Blinov V.M., Kostina M.V., Karpman M.G., Chervyakov A.V., Dymov A.V. On the possibility of using high-strength corrosion-resistant austenitic Cr–N-bearing steels for surgical implants. Russian Metallurgy (Metally). 2002, vol. 2002, no. 3, pp. 301–307.
15. Rashev Ts.V., Zhekova L.Ts., Bogev P.V. Development of metallurgy under pressure. Izvestiya. Ferrous Metallurgy. 2017, vol. 60, no. 1, pp. 60–66. (In Russ.). https://doi.org/10.17073/0368-0797-2017-1-60-66
Review
For citations:
Kostina M.V., Zhekova L.Ts. In memory of Professor Tsolo Rashev (1933 – 2019). Izvestiya. Ferrous Metallurgy. 2021;64(1):78-83. (In Russ.) https://doi.org/10.17073/0368-0797-2021-1-78-83
Views:
650
Email this article 