CURRENT PROBLEMS AND PERSPECTIVES OF COMPUTER SIMULATION OF CONTINUOUS STEEL CASTING

Nowadays we can see increase in using of engineering analysis systems in the field of continuous steel casting simulation due to their high accuracy and convergence with industrial experiments results. Such powerful systems as «ANSYS» and «ProCast» allows solving gas-, hydrodynamic and thermal problems, the parallel interaction of which constitutes the essence of most metallurgical processes. Group of authors from the LSTU Chair “Metallurgical technology” have successfully carried out computer experiments in tundish and continuous casting mold processes simulation. The experiments were aimed at first, on studying of further improving in liquid steel flow modifiers (partitions, turbo-stops, thresholds) design, at second, on influence of argon blowing regime on liquid steel flow parameters in the 50-ton tundish workspace, and, at third, on influence of submerged nozzles design on the liquid steel flow in crystallizer, assuming deterministic-dynamic operation mode. The results of calculations are velocity fields of liquid steel flow and flow temperatures fields in tundish and crystallizer, as well as temperature fields in the tundish refractory lining. An equation of primary flow average velocity change on exit from submerged nozzle was also formulated. These preliminary results allow us to assess the velocity changes and direction of the melt flow and formation of volumes with different melt temperatures when using flow modifiers in the ladle, including using of “argon curtain” in the casting chamber. Obtained data on melt flow motion and on location of erosion spots in crystallizing «crust», also on the presence of temperature gradient zones in various regions of crystallizer workspace may be useful to practice engineers engaged in choice of crystallizer submerged nozzle design. Effective control of melt flow in tundish and in crystallizer allows significant improvements in continuous cast slabs and rolled products quality in context of reducing metal products rejection due to defects associated with slag or nonmetallic inclusions presence and due to cracks formed as the result of insufficient thickness of crystallized «crust».

1. Smirnov A.N., Kravchenko A.V., Verzilov A.P. Improvement of modeling methods and optimization of the parameters of steel dosage systems in slab caster mold. Nauchnye trudy Donetskogo Natsional’nogo Tekhnicheskogo Universiteta, seriya metallurgiya. 2011, Issue 13 (194), pp. 40–47. (In Russ).

2. Tathagata Bhattacharya, Andrew J. Brown, Christopher M. Muller et al. Development of next-generation impact pads for producing ultraclean steel using mathematical models and plant trials. AISTech 2016 Proceedings, pp. 1547–1572.

3. Ukrainskaya Assotsiatsiya Staleplavil’shchikov [Ukranian Steelmakers Association]. Available at: http://uas.su/books/mnlz/mnlz. php (Accessed: 30.10.2015 г.).

4. Wiens О., Mossner V., Raffershaid M etc. Improving casting quality by using an optimized immersion nozzle. Chernye metally, 2012, no. 8, pp. 44–50. (In Russ).

5. Smirnov A.N., Kravchenko A.V., Verzilov A.P. etc. Modeling of the behavior of molten steel in slab caster mold. Рrotsessy lit’ya. 2010, no. 5, pp. 40–47. (In Russ).

6. Solhed H., Jonsson L., Jönsson P. Modeling of the steel/slag interface in a continuous casting tundish. Steel Research International. 2008, vol. 79, no. 5, pp. 348–357.

7. Zhanga T., Luoa Z.G., Liub C.L., Zhoua H., Zou Z.S. A mathematical model considering the interaction of bubbles in continuous casting mold of steel. Powder Technology. 2015, vol. 273, pp.154–164.

8. Liua Z.Q., Qia F.S., Lia B.K., Cheungb S.C.P. Modeling of bubble behaviors and size distribution in a slab continuous casting mold. International Journal of Multiphase Flow. 2016, vol. 79, pp. 190–201.

9. Ramirez Lopez P. E., Pooria Nazem Jalali, Björkvall J., Sjöström U., Nilsson Ch. Recent developments of a numerical model for continuous casting of steel: model theory, setup and comparison to physical modelling with liquid metal. ISIJ International. 2014, vol. 54, no. 2, pp. 342-350.

10. Sen A., Prasad B., Sahu J.K., Tiwari J.N. Designing of sub-entry nozzle for casting defect-free steel. IOP Conference Series: Materials Science and Engineering. 2015, vol. 75, no. 1, pp. 1–6.

11. Bielnicki M., Jowsa J., Cwudzinski A. Multiphase numerical model of molten steel and slag behavior in the continuous casting mold. Archives of Metallurgy and Materials. 2015, vol. 60, no. 1, pp. 257–262.

12. Wu D.F., Cheng S.S. Effect of SEN design on surface fluctuation and solidifying shell in slab mold and its optimization. Acta Metallurgica Sinica (English Letters). 2008, vol. 21, no. 10, pp. 341–350.

13. Zhang L., Yang S., Cai K., etc. Investigation of fluid flow and steel cleanliness in the continuous casting strand. Metallurgical and Materials Transactions. 2007, vol. 38b, pp. 63–68.

14. Meijie Z., Huazhi G., Ao H., Hongxi Z., Chengji D. Numerical simulation and industrial practice of inclusion removal from molten steel by gas bottomblowing in continuous casting tundish. Journal of Mining and Metallurgy Section B Metallurgy. 2011, vol. 47, no. 2, pp. 137–147.

15. Shipel’nikov A.A., Rogotovskii A.N., Bobyleva N.A., Skakov S.V. Computational modeling of melt outflow from submerged nozzles assuming various configuration of nozzle bottom part and vertical section of CCM. Zagotovitel’nye proizvodstva v mashinostroenii. 2016, no. 7, pp. 3–7. (In Russ).

16. Arcos-Gutierrez H., Barreto J. de J., Garcia-Hernandez S., etc. Mathematical analysis of inclusion removal from liquid steel by gas bubbling in a casting tundish. European Journal of Applied Mathematics. 2012, vol. 2012, pp. 1–16.

17. Glebov V.P., Kononykhin G.N. Testing of submerged entry nozzle of experimental design on CCM at JSC “NLMK”. In.: Sovremennaya metallurgiya nachala novogo tysyacheletiya. Sbornik nauchnykh trudov mezhdunarodnoi nauchno-prakticheskoi konferentsii 17-21 dekabrya 2014 g. Chast’ 1. Lipetsk [Modern metallurgy of the beginning of the new millennium. Proceedings of Int. Sci. Conf., December 17-21, 2014, Lipetsk]. Vol. 1. Lipetsk: izd. LSTU, 2014, pp. 143–146. (In Russ).

18. Smirnov A.N., Efimova V.G., Kravchenko A.V. Study conditions of non-metallic inclusions flotation during argon injection of liquid bath in CCM tundish. Report 2. Izvestiya. Ferrous Metallurgy. 2014, vol. 57, no. 1, pp. 19–25.

19. Shipel’nikov A.A., Rogotovskii A.N., Bobyleva N.A. etc. Research and simulation of continuous casting process using modern CAEi-CAD systems. Vestnik Lipetskogo gosudarstvennogo tekhnicheskogo universiteta. 2016, no. 1, pp. 38–45. (In Russ).

20. Bobyleva N.A., Shipel’nikov A.A., Rogotovskii A.N. etc. Influence of submerged nozzle design on melt outflow during steel continuous casting. In.: Sovremennaya metallurgiya novogo tysyacheletiya. Sbornik nauchnykh trudov mezhdunarodnoi nauchno-prakticheskoi konferentsii 8-11 December 2015. Chast’ 1. Lipetsk [Modern metallurgy of the new millennium. Proceedings of Int. Sci. Conf., December 8-11, 2015, Lipetsk]. Lipetsk: izd. LSTU, 2015, vol. 1, pp. 208–215. (In Russ).

21. Rogotovskii A.N., Volodin I.M., Shipel’nikov A.A. etc. Study of the relation between temperature and melt flow velocity in various sections of submerged nozzles in slab mold. Zagotovitel’nye proizvodstva v mashinostroenii. 2016, no. 10, pp. 3–7. (In Russ).

22. Yokoya S., Takagi S., Ootani S., etc. Swirling flow effect in submerged entry nozzle on bulk flow in high throughput slab continuous casting mold. The Iron and Steel Institute of Japan International. 2001, vol. 4, no. 10, pp. 1208–1214.

23. Jowsa J. Bielnicki M., Cwudziński A. Numerical modeling of metal/ flux interface in a continuous casting mold. Archives of Metallurgy and Materials. 2015, vol. 60, no. 4, pp. 2905–2912.

24. Gushchin V.N., Ul’yanov V.A. Effect of external influences on the development of two-phase zone of steel billets. Trudy NGTU im. R.E. Alekseeva. 2014, no. 1(103), pp. 200–204. (In Russ).

25. Bazhukov D.O., Tutarova V.D., Safonov D.S. Slab continuously cast semis heat state mathematical modeling with account for continuous casting machine construction peculiarities. Izvestiya. Ferrous Metallurgy. 2013, no. 1, pp. 3–5. (In Russ).