DIGITAL PROTOTYPES OF MAN-MACHINE SYSTEM PERFORMANCE (IN THE CASE OF DRAWING MILLS)
https://doi.org/10.17073/0368-0797-2018-6-485-489
Abstract
A design method of multifunctional digital prototypes of drawing mills performance as an active man-machine system is developed. The structure of models is determined, including machine drawing time and time of manual operations, equipment coefficients and labor operations, theoretical, feasible and normative cycles and performance of man-machine systems. Fragments of tabular implementation of the proposed integrated normative model of the man-machine system are given.
Keywords
About the Authors
S. M. Kulakov
Siberian State Industrial University.
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair of “Automation and Information Systems” .
Russian Federation
Dr. Sci. (Eng.), Professor of the Chair of “Automation and Information Systems” .
A. I. Musatova
Siberian State Industrial University.
Russian Federation
Senior lecturer of the Chair “Management and Branch Economy”.
Russian Federation
Senior lecturer of the Chair “Management and Branch Economy”.
V. N. Kadykov
Siberian State Industrial University.
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Metal Forming and Metal Science. OJSC “EVRAZ ZSMK”.
Russian Federation
Cand. Sci. (Eng.), Assist. Professor of the Chair “Metal Forming and Metal Science. OJSC “EVRAZ ZSMK”.
References
1. Machulin V.M., Sidorchuk V.E., Astratov S.N., Kim Yu.B., Lobanova N.G. Controlling in the hardware production of RUE “BMZ”. Lit’e i metallurgiya. 2011, no. 2, pp. 115–123. (In Russ.).
2. Singh S.K., Singh M.K. Evaluation of productivity, quality and flexibility of an advanced manufacturing system. Journal of the institution of engineers. 2012, January – March, pp. 93–101.
3. Geraskin M.I., Egorova V.V. The algorithm for dynamic optimization of the production cycle in bearing industry. Information Technology and Nanotechnology. 2016, pp. 552–568.
4. Högman U., Johannesson H. Technology development and normative process models. International design conference. 2010, May, pp. 17–20.
5. Vaisman D.I., Gerasimova Z.A., Rubin G.Sh. Raschet i analiz ispol’zovaniya proizvodstvennykh moshchnostei metiznoi promyshlennosti [Design and analysis of production facilities use of hardware industry]. Moscow: Metallurgiya, 1985, 48 p. (In Russ.).
6. Golubchik E.M., Kuznetsova A.S., Rubin G.Sh., Gun G.S., Dyja H. Application of the model and principles of technological adaptation of quality indicators in the processes of production of hardware products. Vestnik MGTU im. G.I. Nosova. 2016, no. 1, pp. 101–108. (In Russ.).
7. Medikov V.Ya. Proizvodstvennye moshchnosti i ikh ispol’zovanie [Production capacities and their use]. Moscow: MGUP, 2002, 264 p. (In Russ.).
8. Rubin G.Sh., Gun G.S., Polyakova M.A. Standardization of hardware products: features, problems, development prospects. Izvestiya TulGU. Tekhnicheskie nauki. 2014, no. 10-2, pp. 28–33. (In Russ.).
9. Kulakov S.M., Musatova А.I., Kadykov V.N., Baranov P.P. Timing models in the reengineering of metallurgical production systems. Steel in Translation. 2015, vol. 45, no. 5, pp. 367–375.
Review
For citations:
Kulakov S.M., Musatova A.I., Kadykov V.N. DIGITAL PROTOTYPES OF MAN-MACHINE SYSTEM PERFORMANCE (IN THE CASE OF DRAWING MILLS). Izvestiya. Ferrous Metallurgy. 2018;61(6):485-489. (In Russ.) https://doi.org/10.17073/0368-0797-2018-6-485-489
Views:
610
Email this article 