IMPROVEMENT OF PERFORMANCE OF AIR TUYERES FOR BLAST FURNACES WITH GAS-FLAME SPRAYING OF COATINGS
https://doi.org/10.17073/0368-0797-2014-5-65-66
Abstract
Gas-flame coating were used to increase the stability and reducing heat losses through air tuyeres. The result was significantly increasing of stability experienced tuyeres and reduction of heat losses for 3.8 %.
About the Authors
A. G. Radyuk
National University of Science and Technology “MISIS” (MISIS) (Moscow, Russia)
Russian Federation
Russian Federation
Dr. Eng., Leading researcher A.E. Titlyanov, Cand. Eng., Senior researcher
A. E. Titlyanov
National University of Science and Technology “MISIS” (MISIS) (Moscow, Russia)
Russian Federation
Russian Federation
Cand. Eng., Senior researcher
References
1. Koryshev A.N., Gnezdilov I.G., Kuznecov A.E. etc. Sposob podgotovki k rabote furmy domennoj pechi (Preparation methods for the work of blast furnace tuyere). Patent RF № 2147614, 2000.
2. Borodulin A.V., Vasil’ev A.P., Glushhenko E.L. etc. Avtomatizirovannye pechnye agregaty i jenergosberegajushhie tehnologii v metallurgii: tr. II Mezhdunar. nauch.-prakt. konf. Moskva, MISiS, 3 – 5 dekabrja 2002 (Automated furnace units and energy-saving technologies in metallurgy: proc. of II Intern. scientifi c-practical. conf. Moscow, MISA, 3 – 5 December 2002). Pp. 424 – 426.
3. Bondarenko A.A., Gorbik A.S., Dyshlevich G.G. Stal’. 1983. № 7. Pp.11 – 12.
4.
Review
For citations:
Radyuk A.G., Titlyanov A.E. IMPROVEMENT OF PERFORMANCE OF AIR TUYERES FOR BLAST FURNACES WITH GAS-FLAME SPRAYING OF COATINGS. Izvestiya. Ferrous Metallurgy. 2014;57(5):65-66. (In Russ.) https://doi.org/10.17073/0368-0797-2014-5-65-66
Views:
584
Email this article 